李善君：

1942年9生于上海，1965年7月毕业于复旦大学化学系，现为复旦大学高分子科学系教授、博士生导师。曾在University of MASS、Polytechnic University of New York和University of Akron 交流访问。至今共发表学术论文110余篇，其中SCI文章80余篇。申请和获得国家发明专利15项，专著一部，合著两部。主持包括国家科技攻关项目、国家自然科学基金项目、军工项目在内的科研项目共26项。获上海市科技进步奖二等奖3项、三等奖1项；国家教委科技进步奖 1 项；光华科技基金二等奖；上海市化学化工学会吴蕴初专项奖；上海市优秀发明一等奖2项；上海市优秀新产品二等奖2项。

主要研究方向：热塑性增韧改性热固性树脂体系的机理及应用，集成电路封装材料、高分子材料的吸水、物理老化的研究，特种粘合剂及涂料等。
办公室：复旦大学高分子科学系跃进楼302室
联系电话：(021)65642865
E-mail：sjli@fudan.edu.cn
研究方向
1. 高分子多组分反应诱导相分离研究
2. 环氧树脂的吸水机理及物理老化研究
3. 聚酰亚胺的合成及结构与性能的研究
4. 光电聚合物的合成及机理研究
5. 纳米掺杂聚合物的研究
6. 高性能热固性工程材料的开发
7. 集成电路封装材料等电子精细化工材料的开发
研究成果

2001-2004主要论文
1. Xiaolin Tang, Linxia Zhang, Tao Wang, Yingfen Yu, Wenjun Gan, Shanjun Li, Hydrodynamic Effect on Secondary Phase Separation in Epoxy resin Modified with Polyethersulfone, Macromol. Rapid Comm,2004,
2. Liang Li, Mojun Liu, Shanjun Li, Morphology effect on water sorption behavior in a thermoplastic modified epoxy resin system, Polymer, 2004,45,2837-2842
3. Minghai Wang, Yingfeng Yu, Xianguo Wu, Shanjun Li, Polymerization induced phase separation in poly(ether imide)-modified epoxy resin cured with imidazole, Polymer, 2004,45,1253-1259
4. Qingsheng Tao, Wenjun Gan, Yingfeng Yu, Minghai Wang, Xiaolin Tang, Shanjun Li, Viscoelastic effects on the phase separation in thermoplastic modified cyanate ester resin, Polymer, 2004,45,3505-3510
5. Liang Li, Mojun Liu, and Shanjun Li, Dynamic Process of Water Sorption in a Thermoplastic Modified Epoxy Resin System, J Phys Chem.B.2004,108,4601-4606
6. Yingfeng Yu, Minghai Wang, Wenjun Gan, Qingsheng Tao, and Shanjun Li, Polymerization-Induced Viscoelastic Phase Separation in Polyethersulfone-Modified Epoxy Systems, J Phys Chem.B,2004, 6208-6215.
7. Wenjun Gan, Yingfeng Yu, Minghai Wang, Qingshen Tao, and Shanjun Li, Viscoelastic effects on the phase separation in thermoplastics-modified epoxy resin, Macromolecules, 2003, 36, 7746
8. B. Wang, W. Gong, W.H. Liu, Z.F. Wang, N. Qi, X.W. Li, M.J. Liu, S.J. Li, Influence of physical aging and side group on the free volume of epoxy resins probed by positron, Polymer, 2003, 44, 4047
9. Wenjun Gan; Yingfeng Yu; Wang Minghai, Tao qingsheng, Shanjun Li, Morphology evolution during the phase separation of polyetherimide/epoxy blends, Macromol. Rapid Comm. 2003, 24(16),952-956
10. Mojun Liu; Peiyi Wu; Yifu Ding; Shanjun Li, Studies on diffusion behavior of water in epoxy resins cured by active ester, Phys.Chem.Chem.Phys.2003,5,1848
11. M.J. Liu; P.Y. Wu; Y.F. Ding; G. Chen; S.J. Li, Two-dimensional (2D) ATR-FTIR spectroscopic study on water diffusion in cured epoxy resins, Macromolecules. 2002, 35, 5500
12. H.W. Duan; D.Y. Chen; M. Jiang; W.J. Gan; S.J. Li; M. Wang; J. Gong, Self-assembly of unlike homopolymers into hollow spheres in nonselective solvent, J. Am. Chem. Soc. 2001, 123, 12097
13. X.G. Wu; J. Cui; S.J. Li, Studies on the phase Separation of PEI modified epoxy resin, 5 phase separation behavior of a quasi-binary system, Macromol Rapid Commun. 2001, 22, 409
14. Y.F. Ding; M.J. Liu; S.J. Li; S.Y. Zhang, Contributions of the Side Groups to the Characteristics of Water Absorption in Cured Epoxy Resins, Macromol.Chem.Phys. 2001, 202, 2681
15. X.X. Chen; S.J. Li, Further Study of Sub-Tg Heat Flow Transition of a Cured Epoxy Resin, Macromol Rapid Commun, 2001,22, 349
16. Z.C. Zhang; J. Cui; S.J. Li, Effect of Hydroxyl-Terminated Polyethersulfone on the Phase Separation of Polyetherimide-modified Epoxy Resin. Macromol.Chem.Phys. 2001, 202, 126

专利：
1. S.J.Li et al., A fabricated method of epoxy adhesive for surface mounting technology. China patent, CN 1068135A
2. S.J.Li et al., The surperfine silica sol with high purity. China patent, ZL 92 1 08377.7
3. H.B.Wang and S.J.Li et al.,The testing instrument of internal stress for polymer and composite. China patent, 921108342.2
4. H.W.Zhou and S.J.Li et al., A fabricated method of spherical silica for epoxy moulding compound. China patent, 93112356.9
5. Vogl, Otto; Li, Shanjun. Ultraviolet light absorbers having two different chromophors in the same molecule. U. S. Pat. Appl. (1984), 15 pp. Avail. NTIS Order No. PAT-APPL-6-539 366. ( May 17, 1988)
6. Vogl, Otto; Li, Shanjun. Di- and tri(benzotriazolyl)trihydroxybenzenes. U. S. Pat. Appl. (1984), 11 pp. Avail. NTIS Order No. PAT-APPL-6-539 493.
7. S.J.Li, J.W.Xie and S.Z.Zhao, A fabricated method of epoxy molding compound for the encapsulation of electronic device. China patent, No. 964, (1986)
8. S.J.Li, Epoxy resins modified with polyetherimide , China Pat. Appl. No. 00114942.3
9. S.J.Li, Bismaleimide resins modified with polyetherimide,聚醚酰亚胺改性双马来酰胺树脂China Pat. No.100771 证书号 第100771号
10. S.J.Li, Epoxy resins modified with polyesterimide,聚酯酰亚胺改性环氧树脂 China Pat. Appl. No. 021111154 申请号：021111154
11. S.J.Li, Bismaleimide resins modified with polyesterimide, 聚酯酰亚胺改性双马来酰胺树脂China Pat. Appl. No. 02111114.6申请号：02111114.6
12.李善君、陶庆胜、唐晓林，聚醚酰亚胺改性氰酸酯树脂，申请号：031417353，公开号：CN 1480490A
13.李善君、唐晓林、田骏翔，双马来酰亚胺-聚醚酰亚胺-二氧化硅三元杂化纳米材料及其制备方法，申请号：031507050，公开号：CN 1493611A
14.李善君、唐晓林、赵林，双马来酰亚胺-聚醚酰亚胺-二氧化钛三元杂化纳米材料及其制备方法，申请号：031507069，公开号：CN 1493612A
15.李善君、李玉泉、陆振华、周国庆、唐晓林、林海、张晓峰，亲水性高分子防雾涂料及其制备方法，申请号：03129409X，公开号：CN 1472268A